Home — A Quick Guide to Concrete in South Texas

A Quick Guide to Concrete in South Texas

What every homeowner should know before pouring concrete in South Texas — from the ground under your slab to the curing period after the pour.

Why does the ground under my slab matter so much?

The soil beneath your concrete is its foundation. If it is loose or poorly compacted, the slab will crack and sink no matter how good the concrete mix is. Proper base prep is the most important step in any concrete project.

Concrete or asphalt: which holds up better in South Texas heat?

Concrete handles extreme heat far better than asphalt, which softens and ruts in temperatures above 90 degrees. For Mission homeowners who deal with 100-degree summers, concrete is the more durable long-term choice.

When should I worry about cracks in my driveway or patio?

Hairline cracks at control joints are normal. Cracks wide enough to fit a coin, or cracks that run diagonally across the middle of a slab, are a sign of base failure or poor installation. Do not ignore them — water gets in and makes them worse.

What is the curing period and why can I not use my driveway right away?

Concrete does not just dry — it undergoes a chemical process that takes about 28 days to complete. Driving on it too soon can permanently weaken the slab. Most contractors allow foot traffic after 24 to 48 hours, but vehicle traffic should wait at least a week.

Do I really need a permit for a new driveway or patio in Mission?

In most cases, yes. The City of Mission requires permits for new driveways and many patio projects. Skipping the permit can cause problems when you sell your home.

How often does concrete really need to be sealed?

In Mission's intense UV environment, concrete sealers break down faster than in cooler climates. Plan to reseal outdoor surfaces every 2 to 3 years. Regular sealing prevents staining, surface flaking, and moisture damage that shortens the life of your slab.

What thickness do I actually need?

Standard sidewalk and patio work calls for 4 inches of thickness. Driveways should be at least 4 inches, and 5 to 6 inches if you park heavy vehicles on them. Foundations and commercial slabs require engineering-specific thickness.

Why does timing matter for pours in Mission?

Concrete poured in peak summer heat — above 95 degrees — can dry too fast on the surface before it cures properly underneath. Fall and early spring are the best windows for pours in the Rio Grande Valley.

Ready to talk?

Call us — we respond within 1 business day.

Call (956) 833-0052 or send us a message. We respond within 1 business day and come to you for a no-obligation on-site estimate.

(956) 833-0052 Contact Us